Rose-electronics CrystalView DVI CATx User Manual download pdf (Page 12)

INSTALLATION

CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL

Installation

Please refer to the safety section first before proceeding with any installation

or configuration of the CrystalView DVI CATX.

When installing the CrystalView DVI CATX, locate the transmitter as close as

possible to the CPU or switch. Keep the cables as short as possible but still

give some freedom of movement. Using shorter cables keeps the video noise

to a minimum and reduces installation costs. You can mount the CrystalView

DVI CATx in a CPU rack with the optional rack mount kit. When mounting the

units in a rack provide adequate air circulation to assure that the maximum

operating temperature is not exceeded.

Wherever the transmitter and receiver units are located, they should be on a

secure surface and free from obstructions and objects that may cause

damage to the units.

Figure 1. Typical cabling configurations

(See Figure 1 for the connector locations for your model)

NOTE: Local access provides for a second KVM station connected to the

transmitter. Damage to the unit can occur if the DVI connectors are connected

incorrectly. Make sure the DVI connector to the computer is NOT connected

to a DVI monitor.

The serial and audio transmitter connects to the computers serial and audio

ports (Line in / Microphone).

LOCAL KVM REMOTE KVM

ACCESS ACCESS

TRANSMITTER RECEIVER

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Rose-electronics CrystalView DVI CATx User Manual Page 12