Rose-electronics Video Splitter CAT5 User Manual download pdf (Page 8)

CABLES

VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL

Cabling

Unit to CPU cable

A CPU cable connects from the VideoSplitter CAT5 Unit to a CPUs video

monitor port. Serial and audio models also connect a stereo audio cable

and DB9 serial cable to the CPUs audio in/out and serial port.

Max VideoSplitter CAT5 Unit to CPU cable length is 20 feet using standard

cabling. Using coax cabling, this distance can be extended.

VideoSplitter CAT5 Unit to Remote Unit cable

The VideoSplitter CAT5 Unit is connected to the Remote Units with up to

1,000 feet of standard CAT5 UTP/STP “solid core” cable terminated with

RJ45 connectors. Rose Electronics cable part number CAB-08UTPnnn.

Remote Units to video monitor cable

In most cases, the video monitors can connect directly to the remote

receiver units HD15F connector. Serial and audio models also connect to

a set of stereo audio speakers and a serial device.

NOTE: Serial functions are must be initialized properly for this function to

operate properly.

Power adapter

The power adapter

used with the

VideoSplitter CAT5 is a

110V/220V to 5V DC

regulated adapter.

Use only the power

adapter furnished

The VideoSplitter CAT5 Unit has been tested with all major makes of

CAT5 cables, including BICC-VERO



, Mohawk



and AT&T



. It has also

been tested on CAT3 cable and on pairs within a 25-pair UTP trunk cable.

The video performance will vary with different cable types. For the best

performance and video quality, Rose Electronics recommends that only

CAT5 “Solid Core” cable be used.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Rose-electronics Video Splitter CAT5 User Manual Page 8