Rose electronics MPB-4U2V User Manual

SCADA SystemSECTION 16760SCADA SYSTEMPART 1 GENERAL1.01 DESCRIPTIONA. This section covers requirements for the Supervisory Control and DataAcquisition

SCADA Systemc. Resistant to UV light, solvents, corrosion, fungus.d. Overmolded handle.e. Double Throw latches.f. Automatic Ambient Pressure Equalizat

SCADA SystemC. The Laptop shall be DELL Precision Mobile, M4400 Series; Apple,MacBook Pro 17; or equal.D. Laptop computer shall include accessories, c

SCADA Systemb. 10,000 RPM.c. Serial-Attached SCSI.d. 6Gbps.e. 3.5in Hotplug Hard Drive.5. RAID Controller with 512MB Cache and 6 Gb/s SAS interface.6.

SCADA System2) RJ-45 10/100 Base-T.3) USB.LED status display with load and battery bar-graphs and OnLine, On Battery, Replace Battery, Overload and By

SCADA System2.04 HISTORICAL DATA SYSTEM (HDS) SERVERA. The HDS Server shall control the creation, maintenance, and the use ofthe database of historica

SCADA Systemd. Direct Attached Storage (DAS) shall be DELL, PowerVaultMD1000; or equal.8. Redundant Power Supply, High Output, 850W.9. Dual two port 1

SCADA Systemcommunicate directly with the remote sites unless otherwise noted.The Contractor shall be responsible for the integration of the SCADA,Int

SCADA SystemC. The software shall also be capable of performing the followingbackground tasks:1. Report generation.2. Data archiving.3. Historical Dat

SCADA Systeme. Deisel Engine Generators.f- ATSs.g- Battery Banks-h. Meters.i. Associated equipment.2- The system shall be capable of displaying each

SCADA System6. Event Reports shall be available in 15, 30, 60 and 120 or 15 and 64cycle intervals, depending on the NMFR. Prefault Intervals shall be1

SCADA System1.02 RELATED SECTIONSA. Supplementary General Conditions, General Conditions, Division 1sections, and Drawings apply to this section. This

SCADA SystemAlarms: SCADA alarming software shall be configured for notificationof field, communications, and system alarms.1. Provide high, low, equ

SCADA SystemJ. System Database: Field data collected shall be stored to a HistoricalData Server (HDS) that resides on the Ethernet network. Thisarchit

SCADA System7. The database application shall monitor the LAN and/or WANconnections between the actual SCADA Server and the HDS. Inthe event that the

SCADA SystemL. The SCADA System Software is subject to approval.M. The SCADA Systems Integrator shall be TESCO Controls Inc.; EMCORServices -Fluidics;

SCADA Systemb. A3.c. A4.d. A5.e. C5 Envelope.f. DL Envelope.g. Executive.h. Folio.i. JIS-B4.j. JIS-B5.k. Ledger.I. Legal.m. Letter.n. Statement.o. Uni

SCADA System19. Included Ports:a. Internal Card Slot.b. USB Direct interface on Operator Panel.c. Gigabit Ethernet (10/100/1 OOOBASE-T).d. Hi-Speed US

SCADA SystemC. The Enterprise Network Printer shall be Lexmark, C935hdn; Hewlett-Packard, CP6015xh; or equal.2.07 ACCESSORIESA. Ethernet Cables:1. T

SCADA SystemPART 3 EXECUTION3.01 INSTALLATION AND CONFIGURATIONA. General: The Contractor shall be responsible for field measurementsand surveys requi

SCADA System2. Server software shall be loaded onto each server and configured,including licensing, for optimum SCADA System performance.3. The SCADA

SCADA SystemG. Touchscreen HMI software shall be installed as required in accordancewith the software and equipment manufactaurer's recommendatio

SCADA System9. Underwriters Laboratories Inc. (UL).1.04 SUBMITTALSA. The Contractor shall submit the following:1. Catalog cuts sheets.2. System Softwa

SCADA SystemD. The Contractor shall originate and develop a test plan for the followingtests:1. Shop Tests.2. Commissioning Tests.3. Site Acceptance T

SCADA System10. Test reports:a. Commissioning Tests.b. Site Acceptance Tests.1.05 SPARE PARTS AND TOOLSA. The Contractor shall furnish one spare fully

SCADA SystemE. Each pumping plant shall have a local Human Machine Interface (HMI)which shows data and alarms for the associated pumping plant.Informa

SCADA SystemPART 2 PRODUCTS2.01 SCADA WORKSTATIONA. The SCADA Workstation shall be the main View Node used formonitoring and control of the pumping pl

SCADA System12. Monitor Mount including the following:a. Dual Tiered, two over two.b. Wall Mount, Grommet Mount, Flush Mount as approved.c. Up to 30 i

SCADA Systemg. Tower Mount.h. Interface Ports:1) RS-232.2) RJ-45 10/100 Base-T.3) USB.i. LED status display with load and battery bar-graphs and OnLin

SCADA System2.02 LAPTOP COMPUTERA. The SCADA System shall include a Laptop computer which shall beused for bidirectional communication with the PLCs,