10
Orion Installation and Operations Manual
Configure system menu
Figure 7. Configure System menu
System options
(Input) Configuration name.
Used for saving the current configuration to file.
(Input) Device name
(displayed in all menus at the lower left)
(Input) Detailed information about the current configuration
Y – This switch is configured according to a master switch and remotely controlled
No configuration possible.
Y – Upon “Power On” or “Restart” the switch will boot with the Default
configuration.
N – Upon “Power On” or “Restart” the switch will boot with the last configuration.
Y – Switch saves periodically the current configuration into flash.
N – No automatic saving
Y – Switch sends echoes of all performed switch commands
N – No Echoes.
COM Ports
Y – While an OSD is open, all commands via external interfaces are rejected
(LAN, serial).
Select a predefined Baud rate for the serial control port (default: 115.2 kBaud)
Y - Allows a second Orion unit to automatically be switched to the same port as
the master unit
Assigned master unit IP address that secondary units will synchronize to.
(Entered on secondary unit’s OSD)
Comments to this Manuals